language arrow_drop_down
DK NO SE

Archive News


  •

    Karlstad secures the future of water supply and wastewater maintenance with HxGN EAM

    At the same time as many municipal water and wastewater systems are becoming older and thus increasingly maintenance-intensive, the demands on capacity and performance are increasing. The Municipality of Karlstad, in collaboration with Prevas, has streamlined and optimized maintenance and planning of the municipality's water and wastewater system through the introduction of HxGN EAM.
    Read more


  • Prevas welcomes DVel

    Prevas has signed an agreement for the acquisition of 51 percent of DVel AB. DVel is one of Sweden's largest suppliers of customized hardware test systems and is based in Lund with 25 employees.
    Read more


  • Efficient stock management and reduced
    waste with HxGN EAM

    Hexagon Ragasco, the world's leading manufacturer of composite gas containers, has achieved considerable success through efficient and automated production with minimal downtime. Prevas has assisted with implementation of warehouse management in HxGN EAM. This solution has revolutionized their inventory management and resulted in significant benefits, including reduced waste and more control in day-to-day operations.
    Read more


  • Standardized and cloud-based maintenance system – collaboration between Göteborgs Spårvägar and Prevas

    Göteborgs Spårvägar – the public transport company in Gothenburg, Sweden – delivers a key public service that requires extensive synchronization of people, technology and materials. A standardized and cloud-based maintenance system provides the support the enterprise needs, while facilitating future development steps.
    Read more


  • Flexible production system for Hydroscand

    Hydroscand in Örebro manufactures hydraulic hoses and is the market leader in hose and pipe components in Scandinavia. Prevas was commissioned to replace an older system for monitoring the various operations and stations in production with a more reliable and flexible system, which could also be expanded and further enhanced with new functionality.
    Read more


  • eLIPS gives Meritor full control over advanced production logistics

    Meritor HVS AB manufactures front and rear axles for heavy vehicles. Processing, manufacturing and assembly are conducted locally in the factory in Lindesberg, Sweden – everything from raw materials to finished axles. When Meritor needed to replace its systems for warehouse and production logistics, the choice fell to Prevas and eLIPS. This was the beginning of long and fruitful collaboration that continues to this day.
    Read more


  • Prevas takes over Unibap's industrial business in robotics and AI

    Today, Prevas announces that the previously announced letter of intent for the transfer of Unibap's industrial operations has been successfully implemented. The companies have agreed on a transfer of business regarding the employees and ongoing assignments of Unibap's industrial operations. The business will move over to join Prevas on August 1, 2023.
    Read more


  • Prevas interim report January-June 2023

    Profitable growth for the quarter and an all-time-high for the half year.
    Read more


  • Invitation to presentation of Prevas’ interim report January-June 2023

    Prevas will publish the interim report for January-June 2023 on Tuesday, July 18, at 08:30. On the same day at 09.00 a.m. a press and analyst presentation will be held which can be followed via webcast and telephone conference.The presentation is given in English by Magnus Welén (CEO) and Helena Burström (CFO) from Prevas AB.
    Read more


  • Prevas wins award at HxGN Live 2023

    Prevas was crowned Outstanding Channel Partner EMIA 2023 by Hexagon. HxGN LIVE Global is an annual conference organized by Hexagon where future-focused automation experts participate from all over the world.
    Read more


  • Digitized maintenance solution for solar power plants

    Scatec ASA is a Norwegian company that provides renewable energy solutions with a portfolio of 4.6 GW of solar, hydro, and wind power in operation and under construction. To ensure optimal availability and performance of its solar power plants, the company uses the cloud-based solution HxGN EAM, and has chosen Prevas to implement the solution globally.
    Read more


  • Unibap and Prevas sign letter of intent
    regarding Unibap's industrial operations

    Unibap AB (Publ) has just signed a letter of intent with Prevas AB for initiating dialog on the transition of the company's industrial operations. Unibap has worked with automating Swedish industry since 2013 through its robotics and AI technology, as well as development of aerospace technology. In recent years, the company's aerospace operations have grown increasingly stronger and now account for close to 90% of the company's activities. Unibap's board therefore decided to initiate negotiations to transfer its industrial organization to Prevas, which has the capacity to continue develop industrial operations in the long term.
    Read more


  • Prevas acquires cutting-edge company in Life Science

    Prevas has agreed on an organizational transition for staff and current assignments at SDS MedteQ. The organization will be migrated to Prevas in June 2023. Since its founding in 2020, SDS MedteQ has provided premium regulatory services and consulting to medtech companies around the world.
    Read more


  • Information from the Prevas Annual General Meeting 2023

    Prevas AB’s Annual General Meeting took place on Thursday May 11th 2023 at Prevas headquarters in Västerås. The Annual General Meeting voted in agreement with all the proposals submitted by the Board of Directors and the election committee as stated in the previously published announcement.
    Read more


  • Prevas appoints Magnus Welen as new CEO

    Magnus Welén is appointed as the new CEO of Prevas AB, succeeding Johan Strid, who has made the decision to terminate his employment. Johan has, however, made himself available to serve on the board of directors. Magnus Welén will begin his duties as the new CEO on June 1, 2023.
    Read more


  • Prevas present updated financial targets

    Prevas has developed strongly in recent years, with new historical records for turnover, profit and margin for the first quarter 2023.Prevas’ management team and board of directors therefore updates the financial targets. The target for the EBITA margin is increased to at least 12 percent over time, and at the same time, Prevas adjusts the long-term dividend level to 40-60 percent of profit after tax.
    Read more


  • Prevas interim report January-March 2023

    Historical records for turnover, profit and margin.
    Read more


  • Invitation to presentation of Prevas’ interim report January-March 2023

    Prevas will publish the interim report for January-March 2023 on Thursday, April 27, at 08:30. On the same day at 09.00 a.m. a press and analyst presentation will be held which can be followed via webcast and telephone conference.The presentation is given in English by Johan Strid (CEO) and Helena Burström (CFO) from Prevas AB.
    Read more


  • NOTICE OF Annual General Meeting for Prevas AB (PUBL) 2023

    The shareholders of Prevas AB (publ), corporate registration number 556252-1384, are hereby given notice of the Annual General Meeting to be held on Thursday May 11, 2023, at 6 p.m. in the company’s premises at Glödgargränd 14, Västerås, Sweden.
    Read more


  • Prevas UX/UI-expertise helps Nipro choose new design concept

    To improve their understanding of customer needs, Nipro Medical Europe chose to collaborate with Prevas when it came to conducting a comprehensive UX study of their medical devices.
    Read more


  • Prevas Year end report 2022

    Increased turnover and operating profit.
    Proposed dividend 4.50 SEK/share (3.50).
    Read more


  • Invitation to presentation of Prevas’
    Year-end report for 2022

    Prevas will publish the report for the full year 2022 on Thursday, February 9, at 08:30. On the same day at 10.00 a.m. a press and analyst presentation will be held which can be followed via webcast and telephone conference.The presentation is given in English by Johan Strid (CEO) and Helena Burström (CFO) from Prevas AB.
    Read more


  • Prevas signs new agreement for IFS Ultimo EAM

    The Oda Group is the latest company to choose the solution.
    Read more


  • Prevas has signed agreement with Arba One AS

    Becomes first IFS Ultimo EAM customer in Norway in partnership with Prevas.
    Read more


  • Prevas nomination committee

    In accordance with the nomination committee's instructions ratified at the Annual General Meeting on May 11, 2021, which remain in force until a new instructions are adopted, the nomination committee shall consist of the three largest owner-registered shareholders in terms of votes as of the end of September 2022.
    Read more


  • Prevas helping to climate-neutralize reinforcing steel production in Norway

    New order for optimization software.As a step on the road to more climate-neutral, reinforcing steel manufacturing, Prevas has been entrusted with supplying the latest generation of optimization software FOCS G7 to Celsa Armeringsstål Steel AS. The delivery is divided into two stages, with final delivery by 2025.
    Read more


  • Prevas welcomes Myra Industriell Design AB

    Prevas has signed an agreement to acquire 100 percent of Myra Industriell Design AB (Myra). A company at the forefront of industrial design and interaction design.
    Read more


  • Prevas welcomes Koteko

    Prevas has signed an agreement to acquire 100 percent of Koteko AB. Koteko is an engineering company with a good reputation in advanced industrial process automation. Koteko also owns 80 percent of Koteko Installation AB, which is a fast-growing company within industrial installation and service. Combined, Koteko can supply comprehensive solutions from concept to commissioned facility.
    Read more


  • Prevas interim report January – September 2022

    Increased turnover and profit.
    Read more


  • Prevas signs partnership with IFS Ultimo to optimize asset management and maintenance

    Prevas, a well-known service provider of maintenance systems and asset management in the Nordic market, has entered a partnership with Enterprise Asset Management software provider IFS Ultimo.
    Read more


  • Prevas signs agreement with Argeo AS

    Prevas will deliver a solution based on HxGN EAM (Enterprise Asset Management) to Argeo. The maintenance solution will support Argeo's advanced operation of autonomous underwater vehicles (AUVs).
    Read more


  • Automated planning frees resources at Moelven

    In optimizing the production of glued wooden beams, as much material as possible must be glued at the same time. Together with Prevas, Moelven in Töreboda is developing a web-based system that automates the time-consuming planning activities for glue pressing.
    Read more


  • Prevas interim report January – June 2022

    Solid quarter with increased profitability.
    Read more


  • Prevas expands certification in ISO 13485 standard

    Prevas’ office in Copenhagen has now also obtained the ISO 13485 certificate. A clear acknowledgement that we deliver development services in full accordance with the high-quality requirements set for medical devices. The offices in Sundbyberg and Uppsala had already been certified according to the standard.
    Read more


  • Information from the Prevas Annual General Meeting 2022

    Prevas AB’s Annual General Meeting took place on Wednesday May 18th 2022 at Prevas headquarters in Västerås. The Annual General Meeting voted in agreement with all the proposals submitted by the Board of Directors and the election committee as stated in the previously published announcement.
    Read more


  • Prevas interim report January – March 2022

    Solid start of the year.
    Read more


  • Prevas acquiring BitSim NOW AB

    Prevas has signed an agreement for the acquisition of 100 percent of BitSim NOW AB. BitSim NOW, with its 35 employees, is a consulting firm in Stockholm that focuses on product development.
    Read more


  • NOTICE OF Annual General Meeting for Prevas AB (PUBL) 2022

    The shareholders of Prevas AB (publ), corporate registration number 556252-1384, are hereby given notice of the Annual General Meeting to be held on Wednesday May 18th 2022, at 6 p.m. in the Company’s premises at Glödgargränd 14, Västerås (Sweden).
    Read more


  • Prevas grows and welcomes factor10

    Prevas has signed an agreement to acquire 60 percent of factor10. factor10 is a cutting edge company with some of the best software developers in Sweden.
    Read more


  • Prevas appoints new CFO

    Helena Burström has been appointed new CFO of Prevas AB, taking over the role from Andreas Lindahl who, at his own request, has chosen to end his employment to pursue new challenges outside Prevas. Helena assumes her new role on June 1 2022.
    Read more


  • Prevas presents its financial targets for the company

    Prevas has developed steadily and strongly in recent years, and the final quarter of 2021 was marked by several records. Now is the time to clarify ambitions and financial goals going forward. Prevas’ management team and board of directors have thus reviewed and set the company's financial targets.
    Read more


  • Prevas Year-End Report 2021

    Prevas reaches all-time highs. Proposed dividend 3.50 SEK/share (2.0).
    Read more


  • Automated flows minimize manual tasks at McNeil

    When the pharmaceutical company McNeil in Helsingborg was to upgrade its PAS-X, the overall MES system that controls and monitors large parts of their production, Prevas was engaged to develop Middleware that minimizes the risk of incorrect manual entries.
    Read more


  • Prevas interim report January – September 2021

    Strong quarter.
    Read more


  • Prevas: interim report January – June 2021

    Strong quarter and first six months.
    Read more


  • Prevas divests Tritech Solutions AB

    Prevas' subsidiary Tritech Technology AB, together with the three minority shareholders in Tritech Solutions AB, has today entered into an agreement to sell all shares in Tritech Solutions AB to Addtech Nordic AB.
    Read more


  • Prevas acquires cutting-edge company in life science

    Prevas has signed an agreement for the acquisition of the company MEDQURE. The company provides regulatory services and consultation to companies worldwide with medical devices. The acquisition further strengthens Prevas' position in life science.
    Read more


  • The tech industry in open letter to Anna Ekström: Promote digital knowledge and programming in schools

    Swedish IT and Telecom Industries, together with Prevas and a number of industry representatives, have sent an open letter to Education Minister Anna Ekström calling for greater emphasis on digital knowledge and programming in schools. Digitalization and further technological development are limited due to the major challenge faced by the industry in finding people with the right skills.
    Read more


  • Taking the pulse of the energy industry, Göteborg Energi

    In a series of talks, Prevas will be taking the pulse of the energy industry, an industry that is facing constant changes and major challenges. First up is a talk with Peder Holmström at Göteborg Energi.
    Read more


  • Prevas: interim report January – March 2021

    Strong quarter with growth
    Read more


  • Clean drinking water in four hours

    With the help of Prevas, 4Life Solutions has invented the water purifier SaWa, which can purify drinking water for people in the world's poorest countries. At the same time, the solution is inexpensive, safe, easy to use and environmentally sound variant.
    Read more


  • Nomination for new members of Prevas AB board of directors

    Prevas nomination committee has nominated Robert Demark, president of DeVenture AB, and Christer Wallberg, former president and CEO of Tacton Systems AB, as new members of the Prevas AB board of directors.
    Read more


  • NOTICE OF Annual General Meeting for Prevas AB (PUBL)

    The shareholders of Prevas AB (publ), org.no 556252-1384, are hereby given notice of the Annual General Meeting to be held on Tuesday May 11th 2021.
    Read more


  • The devil is in the details

    At least when it comes to planning development of mechanical products. Many mechanical products can seem simple and straightforward at first glance. But the fact is that there is usually a lot of work behind the simplest solutions. For best results, it is important to work out the manufacturing method, material choice, design, etc., and preferably as early as possible in the project.
    Read more


  • Prevas wins prestigious contract with Nye Veier in Norway

    Prevas operations in Norway will deliver the "engine" in Nya Veier's new digital operations support system. The purpose of the new solution is to support and enable digital operations and maintenance management throughout road system life cycles.
    Read more


  • Prevas strengthens hardware cybersecurity

    Prevas' successful basic platforms for hardware and Linux platforms are now also available with the powerful NXP i.MX8 CPU along with support for cybersecurity administration.
    Read more


  • Record-breaking product development, that can save lives.

    Danish company Sentispec has jointly developed the world’s first fully automatic fever screener with Prevas, called the ViraHawk. It can measure the temperature of passers-by and identify potential infection spreaders.
    Read more


  • Vigab starts digitization journey with help from Prevas.

    The Gothenburg company Vigab performs various types of metal processing, mainly for load-bearing structures, industrial installations and interior forging. When after a major investment, they saw the need to automate their material supply, they enlisted the help of the EU-funded program Digiresan, where Prevas became their development partner.
    Read more


  • Prevas enters into agreement to acquire Evotech and the remaining minority shares in Tritech Technology and Deva Mecaneyes.

    Prevas has today entered into an agreement for the acquisition of all shares in the consulting company group Evotech and the remaining minority shares in the operational subsidiaries Tritech Technology and Deva Mecaneyes. The agreement is conditional subject to decision at the Prevas extraordinary general meeting. With the acquisition, an extremely strengthened position in product and production development is achieved.Acquired shares are valued at a total of approximately SEK 270 million and payment will be made through a combination of shares in Prevas issued through a non-cash issue and cash.
    Read more


  • Prevas will be delivering Infor EAM to Norsk Kylling for its new forward-looking facility in Orkanger.

    Norsk Kylling is investing in Infor EAM with Prevas. The solution will initially be tested and commissioned at Norsk Kylling’s current facility and then be implemented at their new hyper-modern factory, currently under construction in Orkanger.
    Read more


  • SAR Group is implementing Infor EAM with Prevas.

    The SAR Group that handles hazardous waste, is in the initial phase of implementing Infor Cloudsuite at its facilities in Norway, from Stavanger in the south to Hammerfest in the north.
    Read more


  • Smartare Elektronikhandboken. 

    Concentrated and easy-to-digest information in a handbook for all who are interested in electronics.
    Read more


  • Denmark gets its first MedTech Alliance. Nordic MedTech Alliance wants to compete with the world’s largest players.

    Denmark has gained its own strategic MedTech Alliance which caters to the life sciences industry. Nordic MedTech Alliance (NMA) is the coalition which by developing digital health products, will be helping the Danish life sciences industry save people’s lives.
    Read more


  • Shh… don't say it [Innovation] too aloud!  

    For many organizations, it gets difficult to talk about Innovation even when everybody is talking about it. That scary word that requires so much thinking and resourcing, and that brings so much uncertainty!
    Read more


  • What is UX and why is it so important to my company?

    "UX and design" is what I usually answer when someone asks me what I work with. UX, what is it?
    Read more


  • Curious about how you can digitalize your field service?

    When organizations decide to work with digitalization, there are many pitfalls to watch out for. There is also considerable risk of thinking that you've introduced digitalized ways of working when you haven’t actually done so.
    Read more


  • Proposal for new members of the board of directors for Prevas AB.

    Prevas' nomination committee proposes that Ebba Fåhreaus, CEO of SmiLe Incubator Lund, and Sven Ivar Mørch, most recently deputy CEO of Acando, be elected as new members of the board of Prevas AB.
    Read more


  • Prevas board of directors withdraws dividend proposal prior to 2020 annual general meeting.

    In view of the Covid-19 outbreak, the market situation is both uncertain and difficult to ascertain. The board of directors for Prevas AB has therefore decided to withdraw the previously announced dividend proposal as a precautionary measure.
    Read more


  • Product development for medical devices,
    Prevas expands certification in ISO 13485 standard.

    Prevas’ office in Uppsala has now also obtained the ISO 13485 certificate. A clear acknowledgement that we deliver development services in full accordance with the high-quality requirements set for medical devices. The office in Sundbyberg had already been certified according to the standard.
    Read more


  • Prevas automating Norway. Major order to Prevas.

    Prevas will be delivering new robotic and automation solutions to a company in the automotive industry. The undertaking includes new production lines with about 20 industrial robots and associated control of the plants.
    Read more


  • Sustainable production in focus as Prevas and Recab join forces.

    Prevas and Recab are both established suppliers in Swedish industry. They have now decided to initiate independent collaboration on sustainable production in order to offer comprehensive solutions that make it easier for organizations to take the next step on their digitalization journeys.
    Read more


  • Prevas sponsor for SmiLe Incubator

    SmiLe Incubator helps entrepreneurs and startup companies in life science to develop and commercialize their products and services. Prevas is now going in as a gold sponsor for SmiLe Incubator and will guide the startups in the jungle of rules and quality requirements in areas such as pharmaceuticals, diagnostics, e-health and medical technology.
    Read more


  • Increased automation and digitization with help from Prevas and Robotlyftet

    Robolyftet is a program initiated by the Swedish government and Swedish Agency for Economic and Regional Growth to promote automation at Sweden’s small and mid-size manufacturing companies. Robolyftet provides financial support in the form of automation checks so that companies can cost-effectively bring in external expertise. Prevas has been designated as a recommended system integrator for Robolyftet.
    Read more


  • Prevas is investing in UX

    The necessity of developing user-friendly and smart products, systems and services is increasing. Prevas is therefore creating a new business unit with focus on the user experience (UX).
    Read more


  • Borås Energi and Miljö AB choose Prevas and Infor EAM for maintenance at Sobacken

    Borås Energi och Miljö AB has invested SEK 3.7 billion in new facilities at Sobacken outside Borås, Sweden. These are hypermodern facilities for district heating, electricity and wastewater. Biogas is also produced here, which goes to public sales and to the municipalities’ cars, trucks and buses. The maintenance solution for the facilities will be supplied by Prevas.
    Read more


  • Is your product cyber-secure?

    With several new initiatives, Prevas tunes in on cyber security and risk management for smart products.
    Read more


  • Grundfos purchases WATS Test Data Management platform

    Grundfos has chosen the Virinco WATS platform for treatment of test data from production sites globally and has chosen Prevas as partner for installation and support. Virinco and Prevas has partnered with Grundfos in the process of implementing the system at Grundfos’ production plants worldwide over the coming years.
    Read more


  • Prevas Expanding with new office in Luleå

    Prevas will be opening its newest office in Sweden on April 1. At the end of 2018, Prevas opened an office in Eskilstuna. Now it’s Luleå’s turn as expansion continues.Luleå is an attractive city with both a rich business climate and an expansive university of technology. The focus for the office will primarily be on developing smart industries and helping customers to meet challenges and find new solutions for achieving sustainable production.
    Read more


  • Prevas introduces Medico Templates

    Prevas has made it easier and faster to get medical devices approved.
    Read more


  • Prevas and AT&T initiating collaboration

    AT&T and Prevas are initiating collaboration to develop IoT solutions (Internet of Things) and smart services for global industries and vertical markets. The three-year arrangement will assist businesses in utilizing AT&T's global and very secure IoT solutions together with Prevas’ industry expertise.
    Read more


  • Business Development Manager with a passion for technology

    At Prevas in Denmark, we are developing tomorrows electronics in collaboration with our customers and we are searching for a Business Development Manager, who will help us grow.
    Read more


  • Digitalization and Automation - in the right way

    That development is moving rapidly in automation and digitalization can hardly be overlooked. The development of collaborative robots, 3D printing, connected machines and smart support systems enables processes to be made more efficient in a ways that have never previously been possible.
    Read more


  • Exciting reading in new issue of Tech Trend

    What does a coffee-roasting plant and a windpower plant have in common with mobile healthcare may not be all that apparent at first glance, but there are similarities. Besides exciting technical solutions, flexible platforms and how one takes advantage of new technology and digitalization, there is a strong sustainability approach regarding the environment and health.
    Read more

References

  • Nipro Medical Europe

    Prevas UX/UI-expertise helps Nipro choose the right solutions within new design concept

  • Moelven

    Automated planning frees resources at Moelven

  • Gradientech

    Ultra-fast diagnostics system can save lives and counteract antibiotic resistance

  • 4Life Solutions

    Clean drinking water in four hours